Grizzly G9749 - Additional Machine Specifications; Spindle and Table Specifications; Operation and Additional Specs; Key Machine Features

-4-
G9749 Variable Speed Drill Press
The information contained herein is deemed accurate as of 3/18/2007 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 2Model G9749
Other Related Information
Base Length............................................................................................................................................... 26 in.
Base Width...........................................................................................................................................18-1/2 in.
Quill Hold Type.................................................................................................................... Lock Lever with Gib
Quill Diameter...............................................................................................................................................3 in.
Depth Stop Type.............................................................................................Threaded Rod with Positive Stop
Column Diameter................................................................................................................................... 4-1/2 in.
Spindle Information
Spindle Taper.............................................................................................................................................MT#3
Spindle Travel........................................................................................................................................ 6-1/2 in.
Dist From Spindle To Column................................................................................................................ 9-3/4 in.
Dist From Spindle To Table................................................................................................................. 28-3/4 in.
Dist From Spindle To Base........................................................................................................................ 50 in.
Table Information
Table Length........................................................................................................................................ 21-3/4 in.
Table Width.......................................................................................................................................... 19-1/2 in.
Table Thickness........................................................................................................................................... 2 in.
Floor To Table Height......................................................................................................................... 18 - 43 in.
Vertical Table Movement................................................................................................ Crank Handle Operate
Table Swivel Around Column................................................................................................................360 deg.
Maximum Movement Of Work Table..........................................................................................................25 in.
No. Of T Slots....................................................................................................................................................
2
T Slot Width...............................................................................................................................................
1/2 in.
T Slot Length........................................................................................................................................15-1/2 in.
Operation Information
Swing................................................................................................................................................... 19-1/2 in.
Drilling Capacity..................................................................................................................................... 1-1/4 in.
No Of Spindle Speeds...........................................................................................................................
Variable
Range Of Spindle Speeds........................................................................................................ 300 - 2000 RPM
Drill Chuck Type......................................................................................................................... JT6 Key Chuck
Drill Chuck Size......................................................................................................................................... 1/2 in.
End Milling Cap......................................................................................................................................... 3/4 in.
Face Milling Cap...........................................................................................................................................3 in.
Other Specifications:
ISO Factory ...................................................................................................................................................ISO 9001
Country Of Origin ..............................................................................................................................................
Taiwan
Warranty ............................................................................................................................................................ 1 Year
Serial Number Location ...................................................................................................... ID Label on Head Casting
Assembly Time ...........................................................................................................................................
10 minutes
Features:
Graduations in 0.001 Inches
Manual Fine Down Feed
Quill Lock and Depth Stop
MT #3 Spindle Taper
Variable Speed
1-1/2HP Motor
Table and Base are Cast Iron