Grizzly G9983 - Section 3: Setup; Unpacking, Inventory, and Setup Needs

-12-
Model G9983 (Mfg. Since 8/09)
Figure 6. Loose parts (not including hardware)
for the Model G9983.
SECTION 3: SETUP
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi
-
tion of your shipment, inventory the contents.
Unpacking
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
The following are needed to complete the setup
process, but are not included with your machine.
Description Qty
• Additional People ....................................... 1
• Safety Glasses ........................................... 1
• Cleaner/Degreaser ..................... As Needed
• Disposable Shop Rags ............... As Needed
• Forklift ......................................................... 1
• Straightedge 4' ........................................... 1
• Screwdriver Phillips #2 ............................... 1
• Screwdriver Flat Head #2 ........................... 1
• Dust Collection System .............................. 1
• Dust Hose 5" .............................................. 1
• Hose Clamps 4" ......................................... 2
• Pressurized Air Supply ......... At least 75 PSI
Needed for Setup
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
• Sanding Unit
• Tool Box
• Combo Wrench 8/10MM
• Combo Wrench 11/13MM
• Combo Wrench 12/14MM
• Combo Wrench 17/19MM
• Combo Box-Wrench 30/37MM
• Phillips Screwdriver
• Hex Wrench Set
• Platen Puller
• Platen
• Door Handle (2)
• Handwheel Handle
• Sanding Belt #180
• Sanding Belt #240