Model G9983 (Mfg. Since 8/09)
-21-
For your convenience, the adjustments listed
below have been performed at the factory and
no further setup is required to operate your
machine.
However, because of the many variables involved
with shipping, we recommend that you at least
check the following adjustments to ensure the
best possible results from your new machine.
All of these adjustments are covered in step-by-
step detail in beginning in the SERVICE section
beginning on Page 28.
Recommend
Adjustments
Recommended adjustment checklist:
• Pressure Rollers
• Oscillation Timing
• Oscillation Speed
• Oscillation Return
• Limit Switch Position
• Feed Belt Tension
• Feed Belt Tracking
• V-Belt Tension
To Next Page
Loading...
