8.3 ShineLogger
ShineLogger is an inverter monitoring product of Growatt New Energy Co., Ltd. It
can collect and analyze running data of inverter via Bluetooth connection, and
display monitoring data on LCD screen; user can also browse data on computer as
well. ShineLogger can monitor up to 4 inverters simultaneity.
ShineLogger has standard data communication interface, including RS232/RS485
serial port, USB port, and Bluetooth, it will be compatible with you existing systems
smoothly.
Pic:
Notes: Indoor installation. Detailed information refers to ShineLogger Manual.
8.4 Shine GPRS collector
PV power station remote data acquisition unit (GPRS data collector) collects inverter
operation data, including PV input voltage, PV input current, AC output voltage, AC
output current, frequency, output power, etc. via RS-485/RS232 connection and send
the above data to website via GPRS, so that users can check power station’s real time
status by login to website www.growatt.net, also can browse historical data in the
past.
Pic:
Notes:
signal is stability. Indoor installation only. Detailed information refers to Shine GPRS
collector manual.
To assure the regular running of collector, user should make sure the GSM
9Trouble shooting
Our quality control program assures that every inverter is manufactured to accurate
specifications and is thoroughly tested before leaving our factory. If you have
difficulty in the operation of your inverter, please read through the following
information to correct the problem.
9.1 General question
For General question, please visit www.ginverter.com, and find the Q&A column.
Customers DON’T need to set the configuration again. Detailed information of
configuration and operation refer to Bluetooth module Introduction.
This device is optional.
To Next Page
Loading...
