Growatt 10000UE - Inverter fault; Specifications; Input Data Specifications

9.2.1 Inverter fault
Input current out of
tolerable range or inverter’s
component is damaged.
1.Check input current is within
the tolerable range.
2.If error message still exists
despite the checking was passed,
contact Growatt.
Communication board has
not received data from
control board for 10
seconds. Electromagnetic
Interference cause
communication problem.
1.Reboot inverter by cutting off
DC supply, and Error message
will disappear.
2.If the error 101 is often displayed,
the environment Electromagnetic
Interference is too strong.
Contact Growatt.
Model setting fault. Reason
can be Model and safety
requirement have not been
set correctly.
Contact Growatt..
Inverter’s component is
damaged.
Contact Growatt.
Error code
Meanings
Suggestion
For 18K/20K inverter:
Problem with fan No.4.
For 8K/10K inverter:
Problem with No. 2 fan.
Note: If there is problem
with other fans, inverter
continue running with
warning on LCD showing:
Fan Error.
1.Replace faulty fan.
2.If problem still exists after
replacement, contact Growatt.
Error: 100
Error: 101
Error: 103
EEPROM fault.
Contact Growatt.
Error: 104
Error: 109
Error: 110
Error: 117
Relay fault
Contact Growatt
Error: 119
GFCI fault.
Contact Growatt
Error code
Meanings
Suggestion
Error: 122
Bus voltage out of range. 1.Check if input voltage is within
the voltage range.
2.If input voltage is around 1000V,
reboot the inverter with lower
input voltage.
3.If error message still exists,
contact Growatt.
Error: 120
Error: 121
Contact Growatt
Output current detection
fault.
Control board has not
received data from
Communication board
for 5S.
Electromagnetic Interference too
strong, contact Growatt.
10 Specifications
Input Data
Max. DC power
Max. DC voltage
PV voltage range MPPT
Max. input current
(input A/input B)
Number of MPP trackers
Max. number of parallel
strings
DC Connections
10000UE
10200W
1000V
400V-800V
15A / 15A
2
2/2
MC4(optional
MC3)
12000UE
12250W
1000V
400V-800V
17A / 17A
2
2/2
MC4(optional
MC3)
20000UE
18400W
1000V
400V-800V
22A / 22A
2
2/2
MC4(optional
MC3)
18000UE
20000W
1000V
400V-800V
25A / 25A
2
2/2
MC4(optional
MC3)