Growatt 10000UE - Dimensions and Clearances; Dimensions and Required Clearances; Minimum Clearances Diagram; Mounting the Bracket

F
G
H
I
J
Do not expose the inverter to direct sunlight, in order to avoid the
power and efficiency derating caused by excessive heating.
The humidity of the installation location should be 0~95%
without condensation.
The ambient temperature of the inverter should be -25℃~+60℃.
The installation location must be freely and safely to get at all
times.
Vertically installation and make sure the connection of inverter
must be downwards. Never install horizontal and avoids forward
and sideways tilt.(Refer to drawings below)
K
L
M
Notice the minimum clearances of the inverter. (Refer to 3.2
Dimensions and Required Clearances).
Do not install the inverter near television antenna or any other
antennas and antenna cables.
Do not install the inverter in living area, the noise caused by the
machine may affect on daily life.
For security reasons, DON’T install the inverter in place where the
children can reach.
N
3.2 Dimensions and Required Clearances
Dimensions and weight :
Types
Height(H) Width(W)
Weight/kg
10000UE
12000UE
18000UE
20000UE
740
740
740
740
440
440
520
520
41
41
60
60
Depth(D)
However, additional clearances are needed to guarantee running and operation of
the inverters. Especially when several inverters are installed together, the clearances
between the inverters and objects are necessary.
3.3 Mounting the Bracket
To mount the inverter on the wall, we should mount the bracket to the wall firmly
first of all.
235
235
235
235