18 19
Ambient dimensions of series inverters
There must be sufficient clearance between the individual inverters to
ensure that the cooling air of the adjacent inverter is not taken in.
If necessary, increase the clearance spaces and make sure there is enough
fresh air supply to ensure sufficient cooling of the inverters.
The inverter can’t install to solarization,drench,firn location. We suggest
that the inverters should be installed at the location with some cover or
protection
Please make sure the inverter is installed at the right place。The inverter
can’t install close to trunk
5.3. Mounting Inverter
5.3.1. Mounting bracket
DANGER
In order to avoid electrical shock or other injury, inspect existing
electronic or plumbing installations before drilling holes.
1.According to the following distance to drill two holes on the wall;
WARNING
Falling equipment can cause serious or even fatal injury, never
mount the inverter on the bracket unless you are sure that the
mounting frame is really firmly mounted on the wall after
carefully checking.
2.Install the explosion screw into the wall;
To Next Page
Loading...
Need help?
General