Growatt SPF 3000T HVM-G2 User Manual

26
Table 2 Inverter Mode Specifications
INVERTER MODEL
SPF 3000T HVM-G2
Rated Output Power
3KVA / 3KW
Output Voltage Waveform
Pure Sine Wave
Output Voltage Regulation
230Vac±5%
Output Frequency
50Hz
Peak Efficiency
94%
Overload Protection
10s@101%~150% load; 5s@≥150% load
Surge Capacity
9KVA / 9KW
Nominal DC Input Voltage
48Vdc
Cold Start Voltage(Lead-Acid Mode)
Low DC Cut-Off Voltage +2Vdc
Cold Start SOC(Li Mode)
>Low DC Cut-off SOC +10%
Low DC Warning Voltage
(Lead-Acid Mode)
44.0Vdc @ load < 20%
42.8Vdc @ 20% ≤ load < 50%
40.4Vdc @ load ≥ 50%
Low DC Warning Return Voltage
(Lead-Acid Mode)
46.0Vdc @ load < 20%
44.8Vdc @ 20% ≤ load < 50%
42.4Vdc @ load ≥ 50%
Low DC Cut-off Voltage
(Lead-Acid Mode)
42.0Vdc @ load < 20%
40.8Vdc @ 20% ≤ load < 50%
38.4Vdc @ load ≥ 50%
Low DC Cut-off Voltage (Lead-Acid
Mode)
42.0Vdc
(Based on Program 21, 40Vdc~48Vdc settable)
Low DC Warning SOC (Li Mode)
Low DC Cut-off SOC +5%
Low DC Warning Return SOC
(Li Mode)
Low DC Cut-off SOC +15%
Low DC Cut-off SOC(Li Mode)
Default 20%, 5%~49% settable
High DC Recovery Voltage
58Vdc
High DC Cut-off Voltage
AGM:60V, FLD:62V, USE or Li Mode: C.V. Voltage + 4.0V
No Load Power Consumption
<20W

Growatt SPF 3000T HVM-G2 Specifications

General

Model	SPF 3000T HVM-G2
Category	Inverter
Rated Power	3000W
Input Voltage	230V AC
Output Voltage	230V AC
Frequency	50Hz/60Hz
Efficiency	93%
Max. PV Array Power	4000W
Max. Charging Current	80A
Max Solar Input Voltage	145V
Max Solar Input Power	4000W
Communication	RS232/USB
Operating Temperature	-10°C to 50°C
Dimensions	330 x 485 x 135 mm
Weight	12 kg
Protection	Overload, Short circuit, Over temperature