Need help?Do you have a question about the Grunbeck GENODOS-Pump GP and is the answer not in the manual?
Specifies the products to which this manual applies.
Lists other relevant documents for the product and its accessories.
Explains how to identify the product using its type plate.
Explains the meaning of various symbols used throughout the manual.
Details the structure and meaning of warning signs and signal words.
Outlines the necessary qualifications for different personnel.
General safety instructions for operating and handling the product.
Safety instructions related to chemicals and product usage.
Procedures to follow in case of dosing agent escape or incorrect dosage.
Describes the intended applications and fields of use for the product.
Identifies and describes the main components of the dosing pump.
Explains the operational principles and features of the dosing pump.
Details the different variants of the GENODOS pump available.
Explains the various displays and setting options on the pump's control panel.
Describes the electrical and signal connections for the pump.
Lists available accessories that can be retrofitted to the product.
Instructions for safely transporting the product.
Guidelines for protecting the product during storage.
Specifies the conditions and requirements for the installation location.
Details how to check the delivered components against the scope of supply.
Provides instructions and considerations for mounting the pump.
Guides on how to connect the suction, pressure, and return lines.
Procedure for checking the system for leaks after installation.
Instructions for connecting external electrical contacts.
Steps to verify the entire dosing system is correctly connected and ready.
How to properly hand over the product to the owner/operator.
How to set up the pump for operation with external signals.
Explains how to set and adjust the dosing volume of the pump.
Procedures for safely changing the chemical used in the pump.
Instructions for cleaning the pump and its components.
Overview of recommended intervals for inspection and maintenance.
Guidelines for performing regular inspections of the pump system.
Details on semi-annual and annual maintenance tasks.
Information on how to obtain spare parts for the product.
Lists parts subject to wear and tear that may need replacement.
Explains the meaning of the LED indicators on the pump.
Lists common issues, their explanations, and remedies.
Procedures for temporarily taking the pump out of operation.
Steps to follow to restart the pump after shutdown.
Instructions for safely dismantling the pump from the system.
Guidelines for environmentally sound disposal of the product.
Template for recording initial start-up details and system setup.
General| Category | Water Pump |
|---|---|
| Max Pressure | 10 bar |
| Diaphragm Material | PTFE |
| Protection Class | IP65 |
| Type | Dosing pump |
| Power Supply | 230 V, 50 Hz |
| Housing Material | Plastic |
To Next Page