Grunbeck GENODOS-Pump GP - Product Identification

Introduction
6 | 84
BA-118940_en_035_GENODOS
-GP.docx
1.3 Product identification
You can identify your product by means of the product designation
and the order number on the type plate.
► Check whether the products indicated in chapter 1.1 corre-
spond to your product.
The type plate is located on the side of the device.
Designation
1
Product designation
2
Observe operation manual
3
Disposal information
4
Order no.
5
Serial no.
6
Dosing volume (H2O) in
ml/stroke
7
EAC test mark
8
CE mark
Designation
9
Dosing pressure
10
Dosing frequency max.
(strokes/min)
11
Suction head
12
Water temperature
13
Ambient temperature
14
Power supply
15
Electrical power consumption
16
Protection/protection class