BA-118940_en_035_GENODOS
-GP.docx
1.6 Personnel requirements
During the individual life cycle phases of the product, different peo-
ple carry out work tasks on the product. The work tasks require dif-
ferent qualifications.
1.6.1 Qualification of personnel
• No special expertise
• Knowledge of the delegated tasks
• Knowledge about possible dangers in case of im-
proper behaviour
• Knowledge of the necessary protective equipment
and protective measures
• Knowledge of residual risks
• Product-specific expertise
• Knowledge of statutory regulations for safety and
accident prevention
Qualified specialist
• Electrical engineering
• Sanitary engineering
(SHK)
• Transport
• Professional training
• Knowledge of relevant standards and regulations
• Knowledge about the recognition and avoidance of
possible dangers
• Knowledge of statutory regulations for accident pre-
vention
Technical service
(Grünbeck's technical
service/authorised ser-
vice company)
• Extended product-specific expertise
• Trained by Grünbeck
To Next Page