Need help?Do you have a question about the Grundfos CM series and is the answer not in the manual?
General| Enclosure Class | IP55 |
|---|---|
| Impeller Material | Stainless steel |
| Type | Centrifugal |
| Material | Cast iron or stainless steel (various grades depending on model) |
| Motor range | 0.37 kW to 4 kW (depending on model) |
| Applications | Water supply, Industrial processes |
| Maximum Operating Pressure | 10 bar |
| Installation | Horizontal or Vertical |
| Stages | Multi-stage |
| Motor Power | 0.37 kW to 4 kW (depending on model) |
| Speed | 2900 rpm |
| Power supply | 1 x 220-240 V, 50/60 Hz or 3 x 220-240/380-415 V, 50/60 Hz (depending on model) |
To Next Page
