24
English (US)
6.18 Resetting
When "DEFAULT" is activated, the pump will return
to the factory settings.
Note: The calibration is also set back to the default
setting. This means that a new calibration is required
when the "DEFAULT" function has been used.
Default settings are the factory settings of standard
pumps. Select "DEFAULT" in the "SETUP" menu.
Default settings:
Fig. 20
6.19 Return
Fig. 21
The "RETURN" function makes it possible to return
from any level in the menu to the operating display
without changes after the menu functions have been
used.
6.20 Language
The display text can be displayed in one of the
following languages:
• English
•German
• French
•Italian
• Spanish
• Portuguese
•Dutch
• Swedish
• Finnish
• Danish
•Czech
•Slovak
•Polish
• Russian.
Operating mode: Manual
Capacity: Maximum capacity
Control panel lock: Unlocked
Default lock code: 2583
Anti-cavitation: Not active
Analog signal: 4-20 mA
Digital inputs: NO (normally open)
Capacity limitation: Maximum capacity
Alarm reset required to restart the pump
Dosing monitoring: Off
Language: English
Units: Metric
Operating display
Operating display
without changes
To Next Page
Loading...
Need help?
General
