Pos. Description
1 Priming plug
2 G1 outlet connection
3 Lifting handle
4 Terminal box and cable connection
5 Base plate
6 Drain plug
7 G1 inlet connection
5.2 Product overview, JP Booster
TM072656
JP PM (top), JP PT-H (left), JP PT-V (right)
Pos. Description
1 Pressure Manager
2 JP pump
3 Pressure switch
4 Pressure tank, horizontal
5 Pressure tank, vertical
6 Base plate
5.3 Intended use
Only use the product according to the
specifications stated in these installation
and operating instructions.
The product is suitable for pressure boosting of clean
water in domestic water-supply systems.
Related information
4. Startup of the product
5.4 Pumped liquids
5.3.1 Intended use of the AISI 316 variant
WARNING
Electric shock
Death or serious personal injury
‐ Do not use the product for cleaning
and other maintenance of swimming
pools or similar places if people are in
the water.
CAUTION
Impurities in the water
Minor or moderate personal injury
‐ Do not use the product for drinking
water.
The AISI 316 variant of the JP pump is especially
suitable for pool-cleaning and saltwater applications.
5.4 Pumped liquids
WARNING
Flammable material
Death or serious personal injury
‐ Do not use the product for flammable
liquids such as diesel oil, petrol or
similar liquids. The product must only
be used for water.
WARNING
Toxic material
Death or serious personal injury
‐ Do not use the product for toxic
liquids. The product must only be used
for water.
WARNING
Corrosive substance
Death or serious personal injury
‐ Do not use the product for aggressive
liquids. The product must only be used
for water.
If the water contains sand, gravel or other
debris, there is a risk of pump blockage
and pump damage. Install a filter on the
inlet side or apply a floating strainer to
protect the pump.
The product is suitable for pumping clean, thin, non-
aggressive, non-toxic and non-explosive liquids
without solid particles or fibres. Examples of liquids:
• potable water
• rainwater.
15
English (GB)
To Next Page
Loading...
