Grundfos JP User Manual

3. When the pump is empty, refit the plug by hand.
TM072420
Related information
7. Taking the product out of operation
7.2
Draining JP PT-H
To drain JP Booster with a horizontal pressure tank,
do as follows:
1. Drain the pump by removing the drain plug.
2. Unscrew the hose on the tank.
3. Tilt the tank so that the water flows out.
4.
When the tank is empty, refit the hose.
TM072432
Related information
7. Taking the product out of operation
7.3
Storage of the product
WARNING
Electric shock
Death or serious personal injury
‐ Switch off the power supply before you
start any work on the product. Make
sure that the power supply cannot be
switched on accidentally.
If the product is to be stored for a period of time, for
example during winter, drain it by removing the drain
plug and store the product indoors in a dry location.
During storage the temperature must be between -40
and +70 ˚C and have a maximum relative humidity of
98 % RH.
Related information
7. Taking the product out of operation
18
English (GB)

Grundfos JP Specifications

General

Power supply	Electric
Material	Stainless Steel, Cast Iron
Applications	pressure boosting
Pump Type	Self-priming centrifugal pump
Horsepower	1.5 HP
Phase	Single-phase
Inlet Size	1 inch
Outlet Size	1 inch