Grundfos magna3 - Page 542

Declaration of conformity
542
– Machinery Directive (2006/42/EC)
Standard used: EN 809:1998 + A1:2009.
– Radio Equipment Directive (2014/53/EU)
Standards used: EN 60335-1:2012/AC:2014 + A11:2014, EN 60335-2-51:2003 + A1:2008 +
A2:2012, EN 62233:2008.
EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-1:2017, EN 61000-6-2:2005, EN 61000-3-
2:2014, EN 61000-3-3:2013, ETSI EN 301 489-1 V2.2.0, ETSI EN 301 489-17 V3.2.0.
ETSI EN 300 328 V2.1.1
– Ecodesign Directive (2009/125/EC)
Circulators:
Commission Regulation (EC) No: 641/2009 and Commission Regulation (EU) 622/2012.
Applies only to circulators marked with the energy efficiency index EEI. See the pump nameplate.
Standards used: EN 16297-1:2012, EN 16297-2:2012.
Applies from July 22, 2019
– RoHS Directives (2011/65/EU and 2015/863/EU).
Standards used: EN50581:2012.
This EU declaration of conformity is only valid when published as part of The Grundfos Safety
instructions and other important information (publication number 99234569).
Bjerringbro, 10th July 2018
Andreas Back-Pedersen
Senior Manager
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Manufacturer, Person authorised to compile technical file and empowered
to sign the EC/EU declaration of conformity.