Grundfos Multilift MD1 - Controller Buttons

Pos. Description
12 High-level alarm
The symbol is on if the liquid level has reached the maximum
level.
13 Liquid level
When the symbol is on, the display shows the liquid level.
14 Values in the form of digits
The value of the function selected.
5.4.2 Buttons
1 2 3
Pos. Description
1 Press this button to go left in the main menu, up in the vertical
menus or decrease a value.
2 Press this button to activate the submenus, confirm the selec-
tion or reset the buzzer.
3 Press this button to go right in the main menu, down in the verti-
cal menus or increase a value.
Multilift MD1, MDV | | 21