EasyManua.ls Logo

Grundfos Multilift MD1 - Technical Data; Operating Conditions; Mechanical Data; Electrical Data

Grundfos Multilift MD1
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13. Technical data
13.1 Operating conditions
Controller
Ambient temperature during
operation [°C]
0-40
Pump
Ambient temperature [°C] SE: -20 to +40
SL: -20 to +30
Liquid temperature [°C] 0-40
For short periods up to 60
pH value 4-10
Maximum density [kg/m3] 1100
Sound pressure level Less than 70 dB (A)
13.2 Mechanical data
Control cabinet
Ambient temperature in stock [°C] -30 to +60
Height x width x depth [mm] Direct-on-line starting: 390 x 262 x 142
Star-delta starting: 680 x 380 x 350
Weight See the controller nameplate.
Enclosure class Direct-on-line starting: IP55
Star-delta starting: IP54
Related information
• 6.2.1 Nameplate
13.3 Electrical data
Power supply
Supply voltage [V] 3 x 380-415, PE
3 x 220-240, PE
Voltage tolerances - 10 %/+ 6 % of rated voltage
Frequency [Hz] 50 or 60
Supply system earthing TN system
Backup fuse See the controller nameplate.
Controller
Voltage tolerances - 10 %/+ 6 % of rated voltage
Frequency [Hz] 50 or 60
Control-current fuse Fine-wire fuse, 100 mA, 250 V, 20 mm x 5
Outputs for alarm devices Potential-free contacts, NO/NC, maximum 250 VAC, 2 A
Input, external reset 230 V
Power consumption [W] Approximately 7
Related information
• 6.2.1 Nameplate
Multilift MD1, MDV | | 45

Table of Contents