Grundfos Multilift MD1 - Scope of Delivery

2.2 Scope of delivery
This list applies to a standard lifting station with one tank. Additional components are included if
you have ordered an additional tank.
Pos. Quantity Description Specification
1 1 Pressure tube With 10 m hose
2 1 Flexible hose with two clamps for the vent
pipe
DN 70
3 1 Inlet seal DN 150
4 1 Tank
5 3 Screws and expansion anchor for tank fixa-
tion
6 1 Flexible connecting piece for optional dia-
phragm pump and fittings
For 1 1/2" pipe
7 2 Seal for pump inlet DN 100
8 2 Connecting flange with stub DN 80 or DN 100
9 1 LC 221 controller
10, 11 2 Vent flange with vent hose and fitting DN 80 or DN 100
12 2 SE or SL pump With 10 m cable
2 Gasket kit DN 80 or DN 100, 8 bolts M16,
nuts, washers and gaskets
1 Installation and operating instructions For lifting station and controller
1 Safety instructions For lifting station and controller
1
2
3
4
5
6
7
8
10
11
12
9
Related information
• 5.5.1 Accessories
Multilift MD1, MDV | | 7