Grundfos RSI - Page 130

f
U
200 %
100
%
50 %
5
6
1
2
3
4
9208
Principle of Stator voltage adjustment
Pos. Description
1 Field Weakening Point Voltage
2 Motor Nominal Voltage
3
Stator Voltage Adjust
(50..200%)
4 back-EMF
5 Motor Nominal Frequency
6 Field Weakening Point
P3.1.3.1 Current limit
This parameter determines the maximum motor
current from the AC drive. The parameter value range
differs from size to size.
When the current limit is active the drive output
frequency is decreased.
This is not an overcurrent trip limit.
130
English (GB)