7. Monitoring menu
7.1 Monitor group
RSI provides you with a possibility to monitor the
actual values of parameters and signals as well as
statuses and measurements. Some of the values to
be monitored are customizable.
7.1.1 Multi-monitor
On the multi-monitor page, you can collect four to
nine values that you wish to monitor.
7.1.2 Trend curve
The Trend Curve feature is a graphical presentation
of two monitor values at a time.
Selecting values to monitor starts logging the values.
In the Trend Curve submenu, you can view the trend
curve, make the signal selections, give the minimum
and maximum settings, Sampling interval and choose
whether to use Autoscaling or not.
Change values to monitor following the procedure
below:
1. Locate the Trend Curve menu in the Monitor
menu and press OK.
2. Further enter the menu View trend curve by
pressing OK again.
3. The current selections to monitor are
FreqReference and Motor speed visible at the
bottom of the display.
4. Only two values can be monitored as trend curves
simultaneously. Select the one of the current
values you wish to change with the arrow buttons
and press OK.
5. Browse the list of given monitoring values with the
arrow buttons, select the one you wish and press
OK.
6. The trend curve of the changed value can be
seen on the display.
TM078684
63
English (GB)
To Next Page
Loading...
