Grundfos RSI - User Interfaces; Keypad of the Drive

6. User interfaces
6.1 Keypad of the drive
The control keypad is the interface between the RSI
and the user. With the control keypad it is possible to
control the speed of a motor, to supervise the state of
the equipment and to set the AC drive's parameters.
6.1.1 Buttons
1
10
9
8
2
3
4
5
6
7
TM066699
Keypad buttons
Pos. Description
1 Scroll menu up / Increase value
2 Graphical display
3 Back button / reset faults
4 Move cursor left
5 Off button
6 Confirm selection
7 Scroll menu down / decrease value
8 On button
9 Move cursor right
10 Home button
Related information
6.1.3 Navigation on keypad
6.1.2
Display
The keypad display indicates the status of the motor
and the drive and any irregularities in motor or drive
functions. On the display, the user sees information
about the drive and his present location in the menu
structure and the item displayed.
6.1.3 Navigation on keypad
The data on the control keypad are arranged in
menus and submenus. Use the Up and Down arrows
to move between the menus. Enter the group/item by
pressing the OK button and return to the former level
by pressing the Back/Reset button.
The Location field indicates your current location. The
Status field gives information about the present status
of the drive. See figure Keypad buttons in section
Buttons.
Related information
6.1.1 Buttons
38
English (GB)