10. Setting the product
The pump will remember the controller settings even if it is turned
off.
10.1 Setting the outlet pressure
Adjust the outlet pressure by pressing .
10.2 Locking and unlocking the operating panel
The operating panel can be locked, which means that the buttons
do not function and no settings can be changed accidentally.
How to lock the operating panel
1. Hold down the buttons simultaneously for 3 seconds.
2. The operating panel is locked when
symbol lights up.
How to unlock the operating panel
1. Hold down the buttons simultaneously for 3 seconds.
2. The operating panel is unlocked when symbol turns off.
10.3 Expert settings, SCALA2
Expert settings are for installers only.
The expert setting menu allows the installer to toggle between the
following functions:
• self-learning
• auto reset
• anti cycling
• maximum continuous operating time.
10.3.1
Accessing the expert settings
Proceed as follows:
1. Hold down the
button for 5 seconds.
2.
The symbol will start flashing to indicate that the expert
settings are active.
The pressure indicator now acts as the expert menu. A flashing
green diode is the cursor. Move the cursor using the
buttons,
and toggle the selection on or off using the
button. The diode for
each setting will light up when the setting is active.
Move cursor up.
Move cursor down.
Toggle settings.
TM064346
Expert menu overview
Pos. Description
1 Auto reset
2 Anti cycling
3 Maximum continuous operating time
4 Exit expert menu
5 Self-learning
17
English (GB)
To Next Page
Loading...
Need help?
General
