Grundig GSS.box DSI 400 - Configuration; Antenna Configuration; Unicable

- 18 - DSI 400
6.2 Configur ation
antenna Configuration
• Click on button "Antenna".
• Dependent on the connecting variant select the corresponding setting for
the SAT inputs, "Quad" (Quad/Oct LNB or multi switch, factory setting),
"Quattro" (Quattro LNB) or "Unicable" and click on button "Save".
• If necessary enter different LNB oscillator frequencies in section "LO1/LO2
Frequency" and click on button "Save".
uniCable
If "Unicable" is selected, selection fields for four user bands and input fields
for the 4 "unicable" frequencies are displayed. Individual user bands can be
deactivated.
• Select the desired respectively deactivate the user bands which are not
needed.
—> If e.g. in your plant two user bands are already in use by other
receivers, you can deactivate this user bands and adjust the two
"free" user bands for the DSI 400.