EasyManua.ls Logo

Grundig GSS.box DSI 400 - IPTV Transmission Modes; Unicast Transmission (Factory Default); Multicast Transmission

Grundig GSS.box DSI 400
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 12 - DSI 400
iPtv transmission modes
uniCast transmission (faCtory default)
At unicast transmission up to 4 clients are supplied with each one station.
When logging in, each client will be assigned to a tuner, whose signal is then
streamed only to this client (unicast). Therefore in menu "Antenna" –> section
"LNB Auto-setting" the check box "automatic frontend allocation" must be
activated (page 19).
—> The number of streams for a smooth playback is dependent on the
dynamic data rates that are transmitted by the broadcasters.
Proper operation of this option also depends heavily on the perform-
ance of the connected network and the clients (particularly for HD
streams).
multiCast transmission
At multicast transmission the IPTV streams are streamed via a multicast IP ad-
dress to the network without a particular target. Any number of clients can
receive these streams by selecting the IP address (and the related port). The
stations, which are streamed, are defined by a multicast list, which must be
uploaded to the DSI 400 (page 27).
—> The number of streams for a smooth playback is dependent on the
dynamic data rates that are transmitted by the broadcasters.
Proper operation of this option also depends heavily on the perform-
ance of the connected network and the clients (particularly for HD
streams).
We recommend a maximum of 4 HD or 6 SD streams.
Therefore in menu "Antenna" –> section "LNB Auto-setting" the check box
"automatic frontend allocation" must be deactivated (page 19).
The configuration of the multicast transmission is to be done via menu
"MenuRTSP" (page 25).

Related product manuals