- 19 - DSI 400
Corresponding to the number of the deactivated user bands, the
same number of tuners are then deactivated.
• Enter the corresponding frequencies via which your unicable LNB/multi-
switch then transmits the programmes to the tuners.
• Store the frequencies using button "Save".
lnb auto-set ting
In section "LNB Auto-setting" you can switch off the "automatic frontend alloca-
tion".
Activated automatic frontend allocation:
With activated automatic frontend allocation a maximum of 4 Clients are sup-
plied each with one station. Each of the clients will be assigned to a tuner. The
clients can individually change the stations, as they have separate tuners.
Deactivated automatic frontend allocation:
With deactivated automatic frontend allocation, during login is checked,
whether the needed transponder is already received. In this case, the client
will be connected to the corresponding tuner. More than 4 clients can be
logged in – but a maximum of 4 Transponders can be received.
If more than 4 clients are logged in, it is not possible to switch to stations,
which are transmitted via a 5th transponder.
—>
Therefore also observe the following hints for antenna configuration.
• Deactivate/activate the automatic frontend allocation and store the modifi-
cation using button "Save".
To Next Page
Loading...
