Grundig SEEN - Setting the time; Setting the date; Hour format (12 H;24 H); Date format

20
SEEN - SEEN A
SETTING THE DATE AND TIME
Setting the time
1. Go to the menu "hs settings"  "Date & time"  "set time".
2. Current date is displayed.
- To keep the time, press
.
- To change it, enter the new time in the HH:MM (24 hours format).
3. Press
.
Setting the date
1. Go to the menu "hs settings"  "Date & time"  "set date".
2. A screen displays the current date.
-
To keep the date, press .
-
To change it, enter the new date in DD/MM/YY or MM/DD/YY format.
3. Press
.
If you make a mistake while entering data, use keys  or .
Hour format (12H/24H)
1. Go to the menu "hs settings"  "Date & time"  "time format".
2. Change the status using the keys or .
3. Press
.
Date format
1. Go to the menu "hs settings"  "Date & time"  "date format".
2. Change the status using the keys or . Press
.
Setting the alarm
1. Go to the menu "hs settings"  "alarm".
 To deactivate the alarm, select "OFF".
 To activate the alarm once, select "ON".
2. Press
.
3. Enter the time at which you would like the alarm clock to sound: "HH – mm ".
4. Press
. « Snooze » (repetition) is displayed on the screen. Press .
 "ON": to activate alarm repetition every 5 minutes.
 "OFF": to deactivate alarm repetition.
The icon
is displayed on the screen. Your alarm is now set.