22
SEEN - SEEN A
SHORT
Spain, United Kingdom, Italy, Switzerland, Austria, Netherlands, Poland, Belgium,
Ireland, Hungary, Slovenia, Romania, Slovakia, Czech Republic and Sweden
MEDIUM
Germany, France, Greece, Portugal, Croatia, Serbia, Montenegro, Bosnia and
Macedonia
LONG Bulgaria
Modifying Base master PIN code
Your base station code (default setting 0000) is required to access certain security functions.
This must contain 4 digits.
1. Go to the menu "Bs settings" "change pin".
2. Enter your old code first, press
.
3. Enter your new PIN code.
Each time a digit is entered the «--» is replaced by a «*». Press
.
4. Enter the new base code again, using the keypad. Press
.
5. Press
key to confirm. You will hear a confirmation tone.
Carefully note your base station code. You will need it to change certain settings.
To Next Page
Loading...
