Seen – Seen A
25
SEEN - SEEN A
ANSWERING MACHINE SETUP (MODELS SEEN A ONLY)
Modify the answering machine mode
1. Go to the menu "ANS. MACHINE" "tam settings" "ANSWER MODE".
2. Select "ANS & REC" or "Answer only" using the or key to activate or deactivate your
answering machine, press
. A confirmation beep is issued.
Modifying the outgoing message (OGM)
Recording a personal outgoing message
1. Go to the menu "ANS. MACHINE""tam settings" "Ogm settings" "ANS & REC" (or "ANSWER ONLY").
2. Select "RECORD Mess" using the or key, press
.
3. Record your message.
4. At the end of your message, press
.
A beep will confirm that your message is now being used.
If you make a mistake while recording the message, repeat the operations described above until you
are satisfied with your message.
The recording of a new message will automatically replace the previous message
.
The maximum recording duration for a message is 180 seconds.
The recording start and end beeps are not part of your message
.
Listening to your answer machine message
1. Go to the menu "ANS. MACHINE" "tam settings" "Ogm settings" "ANS & REC" (or "ANSWER ONLY").
2. Select "playback" using the or key, press
.
3. Your current answer machine message will be played. Your handset will automatically return to
the previous menu.
If you have not saved a personal message, the answering machine will automatically
use the pre-recorded message.
To Next Page
Loading...
