Grundig SEEN - Association of other handsets with your base; Restoring the handset; base Default Settings; Deleting a handset; Modifying the dialing mode

Seen – Seen A
21
SEEN - SEEN A
ADVANCED SETTINGS
Association of other handsets with your base
1. Press and hold the pairing button on the base for 5 seconds (If no handset has been detected
within a minute the pairing mode will stop and your base return to standby).
2. Go to the menu "registration".
3. Enter the 4 digit base master PIN code (default 0000). Press
.
4. The screen will display the number of the handset that has been paired with the base.
Restoring the handset / base Default Settings
1. Go to the menu "RESET".
2. Enter the base master PIN code (default 0000).
3. Press
. A screen displays a request to confirm.
4. Press
.
Deleting a handset
1. Go to the menu "Bs settings"  "delete hs".
2. Enter the base master PIN code (default 0000). Press
.
3. Select the handset you want to delete using the  or  key then press
key.
Modifying the dialing mode
Most telephone systems use the tone dialling mode. You can, however, use the pulse dialling mode:
1. Go to the menu "Bs settings"  "Dial mode".
2. Change the status using the keys or .
3. Press .
Flash timing
If you connect your telephone to a private automatic branch exchange or use it in a foreign country,
you may need to modify the flash duration in order to use your telephone correctly with regard to the
following functionalities: outgoing 2nd call, incoming 2nd call, conference call.
Contact your administrator, who will supply the appropriate time period, and proceed to the new
settings.
1. Go to the menu "Bs settings"  "Flash time".
2. Select the appropriate time period, press .