Grundig SQUIXX CDP 4100 - Additional Functions; Repeating a Track; Playing Back Tracks in Random Order

20
Repeating a track
1 Press »MODE« once during playback.
– Display: »t 1« and the track is repeated.
2 To quit this function, press »STOP ■ «.
Repeating the whole CD ( REPEAT )
1 Press »MODE« twice during playback.
– Display: »t ALL«, and the CD is repeated from the beginning.
2 To quit this function, press »STOP ■ «.
Playing the introductions of tracks on the CD
1 Press »MODE« three times during playback.
– Display: »INTRO« flashes.
2 Press »
ı
PLAY/PAUSE II« to start the function.
– Display: »INTRO« and the first ten seconds of each track are played.
3 To play back the whole of the current track, press »
ı
PLAY/
PAUSE II«.
– »INTRO« disappears from the display.
Playing back tracks in random order
1 Press »MODE« four times during playback.
– Display: »RAND« flashes.
2 Press »
ı
PLAY/PAUSE II« to start the function.
– Display: »RAND« and the titles on the CD are played back in random
order.
3 Press »STOP ■« to quit the function.
– »RAND« disappears from the display
Note:
You cannot select this function if the tracks are being played back in a
set sequence from the memory.
Disabling the buttons on the device
You can use this function to prevent the buttons from being accidentally
pressed (for example when travelling).
1 Push the »HOLD« slider to the »ON« position.
– Display: »HOLD«, all the buttons are disabled.
Note:
The device cannot be switched on. Display: »HOLD«.
2 Push the »HOLD« slider to the »OFF« position to enable the buttons.
– Display: »HOLD« disappears.
ADDITIONAL FUNCTIONS
_________________
t 1
u
00 0 I
0I
:
t ALL
u
00 0 I
0I
:
INTRO
u
00 0 I
0I
:
RAND
u
00 0 I
0I
:
HOLD
u
00 I 5
03
: