Playback via a HiFi system
1 Turn down the volume on the HiFi.
2 Plug a standard cinch cable into the »LINE OUT« socket on the device
and the audio input on the HiFi system.
Note:
You can set the volume and tone on the HiFi system.
Information
This device is noise-suppressed according to the applicable EC directives.
This product fulfils the European directives 89/336/EEC, 73/23/EEC and
93/68/EEC.
This device conforms to the safety regulation DIN EN 60065 (VDE 0860)
and therefore the international safety regulation IEC 60065.
The type plate is located on the bottom of the device.
You will find a symbol similar to the one shown here on the bottom of the
device.
CLASS 1 LASER PRODUCT means that the laser is designed in such a way
as to ensure that the maximum permissible emission value cannot be
exceeded under any circumstances.
If operating devices or methods other than those specified here are
employed, it may lead to dangerous exposure to emissions.
Invisible laser radiation is emitted if the CD compartment is opened and the
safety locking mechanism is shorted. Do not expose yourself to this radia-
tion.
Technical data
Technical and optical modifications reserved!
22
INFORMATION
_____________________________________
Power supply
AC mains adapter:
DC 4.5V, 400 mA +>- external
Battery operation:
2 x 1.5 Volt (LR6, AM3, AA)
Output
Earphones: 2 x 15 mW
Line out: 0,7V ±1,5dB
CD player
Frequency response: 20 Hz ... 20 kHz
Noise voltage ratio: ≥ 80 dB
Channel cross-talk: ≥ 55 dB
D/A conversion: 1 bit linear filter
Dimensions and weight
W x H x D 130 x 30 x 141 mm
Weight (without batteries) ~ 0.3kg
To Next Page