Grundig VISION 9 42-9870 T - Page 13

ENGLISH
13
SCAN Updates the page in teletext mode.
PAT Selects the split screen function in teletext mode.
S Selects different subtitles (in digital TV operation);
selects subpages in teletext mode.
P Selects channel lists (»All«, »Radio«, »FAV1« to
»FAV4«);
Holds the page in teletext mode.
R
Switch on button lighting. The lighting switches
off automatically after a short time.
M Switches to operation of a GRUNDIG
digital receiver, GRUNDIG digital receiver with
hard disk (PDR), GRUNDIG DVD player,
GRUNDIG DVD recorder or GRUNDIG
AV receiver.
Press »
M« until the »DR«, »DVD« or »AMP«
display lights up.
Then select the one you want.
If you do not press a button within 10 seconds,
the remote control returns to television mode
(»TV«).
Note:
»DR« has been programmed for operating a
GRUNDIG digital receiver (remote control
level 1).
»DVD« has been programmed for operating a
GRUNDIG DVD player.
»AMP« has been programmed for operating a
GRUNDIG AV receiver.
The functions available depend on the model of
the device you are using.
Just try it out.
You can change this programming:
Press and hold down »
M« and press three
number buttons to enter the code:
»
1«, »2«, »3« for a GRUNDIG DVD player.
»
4«, »5«, »6« for a GRUNDIG DVD recorder.
»
1«, »4«, »7« for a GRUNDIG digital receiver
(remote control level 1).
»
2«, »5«, »8« for a GRUNDIG digital receiver
(remote control level 2).
»
3«, »6«, »9« for a GRUNDIG digital receiver
with a hard disc (PDR).
OVERVIEW
----------------------------------------------------------------------------------------------