ENGLISH
29
Basic functions
Switching on and off
1 Press »8«, »1…0« or »
V
« or »
Λ
« to switch on the device from
standby mode.
2 Press the »8« button to switch the television to standby mode.
Selecting channels
1 Use »1…0« to select channels directly.
Note:
Analogue channels always begin with »0« (e.g. 01, 012).
2 Press »
V
« or »
Λ
« to move up and down channels.
3 Open the channel list by pressing »G«, select the station with »
V
«
or »
Λ
« and press »G« to switch off the channel list.
Selecting lists
You can select stations from various lists, (e.g. All, FAV1).
1 Press »P« to call up the overview of channel lists.
– The overview is displayed.
2 Press »
V
« or »
Λ
« to select the channel list and »G« to confirm.
Selecting AV channels
1 Call up the »SOURCE« menu with »AV«.
2 Select the desired AV channel position with »
V
« or »
Λ
« and
press »
G« to confirm.
3 Switch back to the television channel with »1…0«.
Switching between digital and analogue channels
1 Open the »SOURCE« menu by pressing »AV«.
2 Press »
V
« or »
Λ
« to select »DTV« (digital presets) or »ATV«
(analogue presets) and press »
G« to confirm.
Adjusting the volume
1 Adjust the volume with »
–
« or »
+
«.
Muting
1 Use »
p
« to switch the sound off (mute) and to switch it on again.
TELEVISION OPERATION
------------------------------------------
To Next Page
Loading...
