ENGLISH
47
Connecting a PC
1 Connect the socket »PC-IN VGA« on the television to the corre-
sponding socket on the PC using a VGA cable.
2 Connect the socket »PC AUDIO-IN« on the television to the
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).
Selecting the channel position for the PC
1 Press »AV«, select the »PC« channel with »
V
« or »
Λ
« and press
»
G« to confirm.
Settings for the PC
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
2 Select the »SETUP« menu with »
V
« or »
Λ
« and confirm with »G«.
3 Select the function or setting you want with »
V
« or »
Λ
« and press
»
–
« or »
+
« to execute it.
– Options:
»Auto position« For automatic PC configuration;
»H Position« Adjust the picture position horizontally;
»V Position« Adjust the picture position vertically;
»Clock« Set the cycle frequency;
»Phase« Remove horizontal flicker, blurring and
horizontal lines.
4 Press »i« to finish the settings.
PC MONITOR MODE
----------------------------------------------------------
SETUP
Auto position
H Position 0
V Position 0
Clock 0
Phase 0
Back Close
1
To Next Page
Loading...
