15
D
o not place your Gryphon component on or near any source of heat such as power amplifiers.
Do not place any object on the top covering the ventilation holes or heat sinks of your Gryphon
component. Do not place it in an enclosed space such as a cabinet, unless ample ventilation is
provided. Failure to observe guidelines may result in overheating.
Y
our Gryphon unit is especially made for the AC voltage of the country to which it has been
shipped. If the voltage of your Gryphon has been changed, the warranty is void and the product
may be unsafe or malfunction. Correct AC polarity contributes greatly to optimum performance.
If you are not using a three-pin, non- reversible power plug, please experiment with the
orientation of the plug for optimum performance.
G
ryphon products are handcrafted by individuals who take great pride in the high level of fit and
finish which we achieve. To maintain your Gryphon components in pristine condition, please
follow these simple instructions. Metal surfaces may be cleaned with a damp cloth or dry
microfiber cloth. Some products made for treatment of vinyl interiors in cars may be useful. Test
the product on a non-visible surface before using any fluids. Acrylic surfaces should only be
wiped with a very soft, dry cloth. Small scratches may be removed with acrylic surface polish.
Fingerprints may be removed with a damp cloth or dry microfiber cloth. In order to avoid
damage to your Gryphon’s finish, do NOT use spirits or paper tissue.
To Next Page
Loading...
Need help?
General
