Gryphon Commander User Manual

25
ON/STB
Places the Commander “On” or in “STB” (Standby)
MONITOR
Tape Monitor is used to listen to a tape recorder. If the recorder has a source/monitor function,
this switch may be used to listen to the tape as it is being recorded. When selected, the display
shows a filled white dot next to the MONITOR button.
MUTE
When the volume level is above 0, use this function to immediately mute the signal. Mute is
indicated on the display with a filled white dot and a cross over the actual level.
DISPLAY
This remote button toggles through the different display intensity options. The selected option
will show in the display. After 5 seconds, the display will return to normal.
VOLUME Up and Down
Raises and lowers the Commander volume setting.
INPUT 1 - 6
The numbered buttons from 1 to 6 are used to directly select the desired input.
INPUT Up and Down
Enables user to toggle between inputs.
Remote Control

Gryphon Commander Specifications

General

Brand	Gryphon
Model	Commander
Category	Amplifier
Language	English