27
GREEN BIAS
For Green Bias control of compatible Gryphon power amplifier(s).
Please also refer to the
description in the chapter: "Green Bias" - and to the Owner’s Manual of your power amplifier.
IR
The IR input enables connection of an external active IR receiver
12V LINK IN
For switching the Commander between STB (Standby) and ON when connected to a unit with
compatible link output.
12V LINK OUT
For switching other units with compatible link input between STB and ON following the STB/ON
status of the Commander Preamplifier.
ANALOG PSU and DIGITAL PSU
Connect these inputs to the Commander Power Supply as described in the ”Installation” section
of this manual.
GROUND
Binding post for chassis ground.
Service panel
Do not remove the small service panel. For service purposes only.
To Next Page
Loading...
Need help?
General
