EasyManuals Logo

Guest 2606A User Manual

Guest 2606A
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
Personal Safety Precautions
Adhere to the following personal safety precautions when installing or working with the
chargers:
1.
Someone should be within voice range or close enough to come to your aid when
you work near a lead-acid battery.
2.
Have plenty of fresh water and soap nearby in case battery acid contacts skin,
clothing, or eyes.
3.
Wear complete eye protection and clothing protection. Avoid touching eyes while
working near a battery.
4.
If battery acid contacts skin or clothing, wash them immediately with soap and
water. If acid enters the eye, flood the eye with cold, running water for at least ten
minutes and get medical attention.
5.
Never smoke or allow an open flame in the vicinity of the battery.
6.
Do not drop a metal tool onto the battery. It may spark, short circuit the battery and
may cause an explosion.
7.
Remove all personal metal items such as rings, bracelets, necklaces, and watches
when working near a lead-acid battery. A battery can produce short circuit currents
high enough to weld a ring or the like to metal, causing a severe burn.
Preparing to Charge Precautions
Before charging a battery with the charger, read the following precautions:
1.
Do NOT operate the charger if the input or output cables or an LED is damaged.
2.
Make sure all accessories on the product you are charging are OFF.
3.
If the battery or batteries must be removed from the product, always remove the
grounded terminal from the battery first.
4.
Be sure the area around the battery is well ventilated while the battery is being
charged. Gas can be forcefully blown away using a piece of cardboard or other
non-metallic material as a “hand fan”.
5.
Clean battery terminals. Be careful to keep corrosion from coming in contact with
eyes.
6.
If you are using a non-sealed battery, add distilled water in each cell until battery
acid reaches levels specified by the battery manufacturer. Do not overfill. For a
battery without cell caps, carefully follow the manufacturer’s recharging instructions.
7.
NEVER charge a frozen battery.

Other manuals for Guest 2606A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Guest 2606A and is the answer not in the manual?

Guest 2606A Specifications

General IconGeneral
BrandGuest
Model2606A
CategoryBattery Charger
LanguageEnglish

Related product manuals