EasyManua.ls Logo

Guldmann GL5 .2 - Charging Procedure

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
© Guldmann GB/US-04/2023 • # 561577_102
© Guldmann GB/US-04/2023 • # 561577_102
6.04 Charging procedure
Recharge lifter every night or when it is not in use. This maintains the batte-
ries and ensures a long life span. Avoid fully discharging the battery.
Recharging
Recharge by plugging the power cord
(pos. 15) into a wall socket. While charging,
the green LEDs on the control box are lit.
The green LED on the control box is lit during
charging when the power cord is plugged in.
The power supply is automatically disconnect-
ed when the lifter is fully charged. The green
“Charge” LED turns o󰀨 on the control box.
Recharge when only 1 green LED positioned
above a battery symbol on the hand control is
lit.
When the green LED of the empty battery
indicator is lit on the hand control and the
alarm sounds, there is limited use of the
mobile lifter.
The lifter cannot be used while charging.
Do not recharge in wet areas/bathrooms.
Maximum recharging time is approx. 4 hours.
After recharging, please allow up to 15
seconds battery capacity calibration before
using the lifter.
When fully charged 3 green LED illuminates
on both the control box and hand control.
15
Note!
Ensure the wall socket is turned o󰀨 when connecting the power cord to the
control box to charge the battery.

Related product manuals