GRS-6052A/6032A OSCILLOSCOPE
USER MANUAL
⎯ ⎯
34
5. OPERATION METHOD
This section contains basic operation information and techniques that should be
considered before proceeding any measurement. As for the location and function
of instrument controls, connectors, and indicators, refer to the “Instruction of
Front Panel and Rear Panel” of this manual.
5-1.Readout Display
The CRT readout display indicates how to set up the instrument controls. No
physical marking shown on the rotating switches indicates the control setting. A
key to the location and type of readout information display are illustrated in
figure 5-1(a) and 5-1(b):
GRS-6052A/6032A OSCILLOSCOPE
USER MANUAL
⎯ ⎯
35
Figure 5-1(a) REAL TIME mode Readout Layout
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
