GRS-6052A/6032A OSCILLOSCOPE
USER MANUAL
⎯ ⎯
12
Front panel of GRS-6052A
GRS-6052A/6032A OSCILLOSCOPE
USER MANUAL
⎯ ⎯
13
4-1.Front Panel
Display controls
The display controls adjust the on-screen appearance of the waveform and
provide a probe compensation signal source.
(1) POWER – Pushbutton
When switch on the oscilloscope to have all LEDs lighted and wait a few
seconds, the normal operation mode is present. Then the last settings become
activated and the LED indicates “ON” condition.
(2) TRACE ROTATION
The TRACE ROTATION is for aligning the horizontal trace in parallel with
graticule lines. This potentiometer can be adjusted with a small screwdriver.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
