GW Instek LCR-6300 - Trg; Sav; Rcl

Command Reference
126
11.19.2 *TRG
The *TRG command (trigger command) performs the same function as the
Group Execute Trigger command.
Command
Syntax
*TRG
Query Response
<primary value>,<secondary value>,<comparator
result>
Example
SEND> *TRG
RET> +5.56675e-11,+7.25470e-01,OUT
Note
This command can be used in BUS trigger mode.
*TRG = TRIG;:FETC?
11.19.3 *SAV
*SAV = FILE:SAVE
The *SAV command saves all user settings into the currently used file.
Command
Syntax
*SAV
Example
SEND> *SAV<NL>
11.19.4 *RCL
*RCL = FILE:LOAD
The *RCL command recalls all user settings from the currently used file.
Command
Syntax
*RCL
Example
SEND> *RCL<NL>