GW Instek LCR-6300 - Auto Save Data to Last File [AUTO SAVE]; File Operation

File Operation
80
7.1.3 Auto save data to last file [AUTO SAVE]
You can save the modified data into the last used file
when the instrument power key is pressed.
To turn on/off the AUTO SAVE function
Step 1. Press the [Setup] key.
Step 2. Press the [FILE] bottom soft-key.
Step 3. Use the cursor key to select the [AUTO SAVE]
field.
Step 4. Use the soft-keys to select the save option.
Soft-key
Function
ON
Auto save function will be enabled.
OFF
Turn off the auto save function.
7.1.4 File operation
To choose a file to operate
Step 1. Press the [Setup] key.
Step 2. Press the [FILE] bottom soft-key.
Step 3. Use the cursor keys to select a file (File name
from 0 to 9).
Step 4. Use the soft-keys to perform an operation.
Soft-key
Function
SAVE
Save user configuration data into
currently selected file.
RECALL
Recall configuration data from
currently selected file.
ERASE
Erase the selected file. The user
configuration data will be reset to the
default at the next startup.
MODIFY DES
Modify the file description.