GW Instek LCR-6300 - Account Setting

LCR-6000 Series User Manual
71
Soft-key
Function
HOUR INCR+
Increases the hour in steps of 1.
HOUR DECR-
Decreases the hour in steps of 1.
MINUTE INCR+
Increases the minute in steps of 1.
MINUTE INCR-
Decreases the minute in steps of 1.
SECOND DECR+
Increases the second in steps of 1.
SECOND DECR-
Decreases the second in steps of 1.
6.1.2 Account Setting
The LCR-6000 Series has two accounts, administrator
and user.
Administrator: All functions can be configured by the
administrator except [SYSTEM SERVICE] page.
User: All functions can be configured by user except the
[SYSTEM SERVICE] page and the [FILE] page.
To Change Account
Step 1. Press the [Measure] or [Setup] key.
Step 2. Press the [SYSTEM] bottom soft-key.
Step 3. Use the cursor key to select ACCOUNT field.
Step 4. Use the soft-keys to change account.
Soft-key
Function
ADMIN
Administrator
USER
User
Switch user mode to administrator mode, you must input
a correct password.
To Change Administrator’s Password
Step 1. Press the [Measure] or [Setup] key.
Step 2. Press the [SYSTEM] bottom soft-key.
Step 3. Use the cursor key to select
[ADMINISTRATOR] field. When the
ACCOUNT field is [USER], you should
change to [ADMINISTRATOR].
Step 4. Use the soft-keys to change the password or
delete the password.
Soft-key
Function
CHANGE
PASSWORD
Input password (less than 9 numbers).
DELETE
PASSWORD
The password will be removed.