Figure 8-18
Min setting:
l Press F1/F2 key to select the white inverted characters “Min”.
l Key-in SORT Min value through panel keyboard.
l Press ↵ key. Please refer to Figure 8-19 below.
※After the value is input, it will proceed conversion of -% automatically.
Figure 8-19
“-” setting:
l Press F1/F2 key to select the white inverted characters “-”.
l Key-in the smallest minus percentage of SORT Nominal Value through the
panel keyboard.
l Press ↵ key. Please refer to Figure 8-20 below.
※After the value is input, it will proceed conversion of Min automatically.
EXIT
BIN1
SORT BY C TOt_Bin:13
C_Nom.Val: 15.000pF
Max:16.500pF +:10.0%
Min:13.500pF :10.0%
D_Max:1.0000
D_Min:0.00010
CLR
Press F1.F2
key to the
-
NEXT
BIN
-
Press F3 key
to delete the
values input
in error
EXIT
BIN1
SORT BY C TOt_Bin:13
C_Nom.Val:15.000pF
Max:16.500pF+:10.0%
:13.500pF-:10.0%
D_Max:1.0000
D_Min:0.00010
CLR
Press F1.F2
key to the Max
NEXT
BIN
Min
Press F3 key
to delete the
values input
in error
LCR-800 Series User Manual
61
Figure 8-20
D_Max setting：
l Press F1/F2 key to select the white inverted characters “D_Max”.
l Set the largest D value of secondary parameter. Please refer to Figure 8-21
below.
Figure 8-21
D_Min setting:
l Press F1/F2 key to select the white inverted characters “D_Min”.
l Set the smallest D value of secondary parameter. Please refer to Figure 8-22.
Figure 8-22
EXIT
BIN1
SORT BY C TOt_Bin:13
C_Nom.Val: 15.000pF
Max:16.500pF+:10.0%
Min:13.500pF-:10.0%
:1.000
D_Min :.0010
CLR
Press F1.F2
key to the
D_Max
NEXT
BIN
D_Max
Press F3 key
to delete the
values input
in error
EXIT
BIN1
SORT BY C TOt_Bin:13
C_Nom.Val: 15.000pF
Max:16.500pF+:10.0%
Min:13.500pF-:10.0%
D_Max :1.000
:.0010
CLR
Press F1.F2
key to the
D_Min
NEXT
BIN
D_Min
Press F3 key
to delete the
values input
in error
To Next Page
Loading...
