GW Instek PSU 60-25 - Remote Control Overview

REMOTE CONTROL
117
:SYSTem:CONFigure:TRIGger:OUTPut:WIDTh
Set
Query
Description
Sets or queries the output trigger pulse width. A
setting of 0 indicates that the output trigger will
go high or low, depending on the output level
setting.
Related
Commands
:SYSTem:CONFigure:TRIGger:OUTPut:LEVel
Syntax
Return Syntax
:SYSTem:CONFigure:TRIGger:OUTPut:WIDTh
{<NR2>|MINimum|MAXimum}
:SYSTem:CONFigure:TRIGger:OUTPut:WIDTh?
[MINimum|MAXimum]
Parameter
<NR2>
0 ~ 60ms.
MINimum
Minimum width = 0
MAXimum
60ms
Return Parameter
<NR2>
Returns the trigger output width.
:SYSTem:CONFigure:TRIGger:OUTPut:LEVel
Set
Query
Description
Sets the polarity of the output trigger level when
the output trigger pulse width is set to 0.
Syntax
Return Syntax
:SYSTem:CONFigure:TRIGger:OUTPut:LEVel
{<NR1>|LOW|HIGH}
:SYSTem:CONFigure:TRIGger:OUTPut:LEVel?
Parameter
0 | LOW
Sets the output trigger to active low.
1 | HIGH
Sets the output trigger to active high.
Return Parameter
<NR1>
Returns the trigger output width.
:SYSTem:COMMunicate:ENABle
Set
Query
Description
Enables/Disables GPIB, USB or other remote
interfaces such as Sockets and the Web Server.