PSU Series Quick Start Guide
30
9. Use the Current knob to set the
current.
Notice the Set key becomes illuminated when
setting the current or voltage. If the voltage or
current knobs are unresponsive, press the Set key
first.
10. Press the Output key. The
Output key becomes
illuminated.
CC will become
illuminated (right)
AV
VOLTAGE CURRENT
VSR LAN RMT ERR DLY ALM ISR M 1 M 2 M 3 RUN
C V C C
Only the current level can be altered when the
output is on. The voltage level can only be changed
by pressing the Set key.
For more information on the Normal Function
Settings, see the user manual.
To Next Page
Loading...
Need help?
General
