12
Display the channel, set: On/Off
Camera Color Setup
Hue: 0~50
Brightness: 0~50
Contrast: 0~50
Saturation: 0~50
PTZ Setting
Type
Speed dome model type. Set: PTC-301, PTC-203ST, FUM 626,
JG_QG988, FUM 622SD, FUM 628 or off. Please select the correct
communication protocol if you enable this setting.
Protocol
Speed dome protocol. Set: PELCO P, PELCO D, MIKAMI or off.
Address
Speed dome address. Set: 0~255
Baud Rate
Speed dome baud rate. Set: 1200, 2400, 4800, 9600, 19200.
Tour Time
Speed dome tour time. Set: 5, 10, 15, 20, 25 sec or off.
Tilt Opposite
Set speed dome image upside down. Set: On/Off
Preset
To Next Page
Loading...
