8
(1) Turn off the circuit breaker for the power feed to the power supply. 断开电源输
入端断路器。
(2) Remove the cable tie from the power cord, and then remove the power cord. 松
开固定电源线的可拆卸式扎带，并拔出电源线。
(3) Pressing the latch towards the handle direction, pull the power supply part way
out of the slot. 向拉手侧掰动锁闩，同时沿插槽导轨向外拉动电源模块，将电
源模块拉出来一部分。
(4) Grasping the handle of the power supply with one hand and supporting its
bottom with the other, pull the power supply slowly out of the slot along the
guide rails. 用一只手握住电源模块拉手，另一只手托住电源模块下方，将电源
模块沿着插槽导轨水平缓慢地拉出。
(5) Put the removed power supply into an antistatic bag. 将拆卸下来的电源模块放
到防静电袋中。
Copyright © 2021
, New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
Copyright © 2021 新华三技术有限公司
版权所有，保留一切权利
本文档中的信息如有更改，恕不另行通知
如需了解产品及安装方面的更多信息，请登录 H3C 网站
To Previous Page
Loading...
Need help?
General